skip to main
FiberArts.org

July 20, 2015
Wanted: 8 shaft loom I'm looking for an 8 shaft jack loom... 
Wanted: 8 shaft loom I'm looking for an 8 shaft jack loom. I'd like one that weaves between 30" to 40". If you have one you want to sell, please contact me. I'd like to find one in New England or New York. Thanks or 413-467-3441
Phone: 413-467-3441
original ad       Wanted: 8 shaft loom I'm looking for an 8 shaft jack loom...

July 19, 2015
Used Table Loom 15" Leclerc Nilus table loom. The perfect workshop loom... 
Used Table Loom 15" Leclerc Nilus table loom. The perfect workshop loom!! Reconditioned, new heddles. Central Florida, Orlando area pickup. Asking $275.00
original ad       Used Table Loom 15" Leclerc Nilus table loom. The perfect workshop loom...

July 16, 2015
small leclerc floor loom 22" weaving width (two spool racks... 
small leclerc floor loom 22" weaving width (two spool racks, tension box, and counter also available) Leclerc 4-shaft/6 treadle floor loom (Jack type) in very good condition. Includes 12-dent reed and sectional beam which is remove able for plain beam. a very sturdy loom that folds up for easy transport. Located in Amity, Arkansas, about 30 minutes south of Hot Springs. For pick up only. Price: $700Email: or call 870-997-1368
Phone: 870-997-1368
original ad       small leclerc floor loom 22" weaving width (two spool racks...

July 16, 2015
small leclerc floor loom for sale 22" weaving width Leclerc... 
small leclerc floor loom for sale 22" weaving width Leclerc 4-shaft/6 treadle floor loom (Jack type) in very good condition. Includes 12-dent reed and sectional beam which is remove able for plain beam. a very sturdy loom that folds up for easy transport. Located in Amity, Arkansas, about 30 minutes south of Hot Springs. For pick up only. Price: $700. Email: or call 870-997-1368
Phone: 870-997-1368
original ad       small leclerc floor loom for sale 22" weaving width Leclerc...

July 15, 2015
32" 8h Ashford Table loom 32" *h Ashford table loom for sale for $500... 
32" 8h Ashford Table loom 32" *h Ashford table loom for sale for $500. Has 90-100 heddles per harness, 10 dent stainless reed, new Ashford boat shuttle, stick shuttles, threading hook. Includes table which is not made by Ashford. Loom folds for transport, as does table. Located in se Connecticut, but can meet anywhere between there andBronx ny. Contact Helana
original ad       32" 8h Ashford Table loom 32" *h Ashford table loom for sale for $500...

July 14, 2015
45" Cherry Low Castle Loom 12 treddles, 8 harness... 
45" Cherry Low Castle Loom 12 treddles, 8 harness, reed has 10 dents/inch, made by Loomcraft in Littleton, Colorado. Cherry Bench included. Additional heddles and heddle transfer bars included. I hate to sell it but my dreams surpassed my time commitment. It is beautiful to look at - maybe start something complicated and have it sitting in your living room. Now I'm downsizing so Original price $2,000 am asking $1,000. Must be picked up - on i-35 in central Iowa.
original ad

July 14, 2015
45" Cherry Low Castle Loom sorry I didn't add these the... 
45" Cherry Low Castle Loom sorry I didn't add these the correct way cp
original ad

July 14, 2015
Harrisville Design 36-inch 4h Floor Loom with Bench - $900 4-harness... 
Harrisville Design 36-inch 4h Floor Loom with Bench - $900 4-harness, 6-treadle hard rock maple floor loom 36-inch weaving width 800+ large-eye wire heddles 10-dent and 12-dent reeds included (12-dent reed is stainless steel) Castle height: 42" Floor space: : 42" x 32", folds to 42" x 13" Includes storage tray and raddle for storing bobbins Includes hd large loom bench Asking $900 but I am open to reasonable offers Located in North Florida (Tallahassee). Pick-up only.
original ad       Harrisville Design 36-inch 4h Floor Loom with Bench - $900 4-harness...

July 14, 2015
Nilius leclerc loom Entire weaving studio for sale... 
Nilius leclerc loom Entire weaving studio for sale,includes 45 inch nilius leclerc jack loom,bench with storage,heddles,Manuel bobbin winder,bobbins,ott lite,2 reeds,warping board.asking $650,willing to entertain reasonable offers.it is sitting gathering dust.
original ad

July 14, 2015
Vintage Walker 36" Weaving Width Counterbalance Loom a... 
Vintage Walker 36" Weaving Width Counterbalance Loom a vintage counter balance loom that has been refinished and fully restored. The loom is a Walker Manufacturing Company Loom from Philadelphia Pa. and is in excellent condition. It has 4 harnesses and a 36 inch weaving width. Leclerc sectional bars were added to the back beam, which can easily be removed to return the loom to a plain back beam. Comes with a bench and two reeds: a stainless steel 36.75 inch wide 12 dent and a 40 inch - 10 dent with some rust. The 40 inch reed is a tight fit in the beater but does work. The only change I have made to the loom was the addition of new bolts and wing nuts to the beater to make it easier to change reeds and a new cloth apron. Original bolts to the beater come with. This loom is a perfect fit for someone who is interested in weaving and wants a visually pleasing work of art in their studio. I am facilitating the sale of this loom for a friend and the loom is currently in my studio. She is asking $850.00. I travel once a month on i90 towards Erie and then down i79 towards Pittsburgh and can easily take the loom with me. The overall dimensions are 48.5 inches wide by 43 inches deep and can be disassembled. This does not take into account the brake handle on the back. Let me know if you have any questions or would like to see more images. photo
original ad

First   Previous   Next   Last
    Page (65 of 178)

Search All Ads

Any word
Every word
Exact match

Last two weeks
Last month
Last two months
All dates